Manufacturer of Machined Solutions

Place an order before 1pm CST for next day shipping.

Product Selection

*Lead Time (in work days) based on no availability

  1. Home
  2. SPRINGS
  3. ACCESSORIES
  4. MOUNTS

BF
BF is a flange mount used to clamp the base of the gas spring to the tool by using the lower C-groove of the gas spring.

FCS
FCS is a square flange mount used to mount the gas spring in the upper C-groove.

FC
FCS meets the ISO 11901-2, VDI 3003, Ford WDX35-62, GM 90.25 and other standards.

FFC
FFC is a foot mount used to clamp the base of the gas spring to the tool by using U-groove of the gas spring. FFC meets the ISO 11901-2, VDI 3003, Ford WDX35-62, GM 90.25 and other standards.

FK
FK is a square flange mount used to mount the gas spring in the upper C-groove.

FSL
The FSL flange type originally was developed to fit gas springs with a lower C-groove and consists of two halves with a lock ring between. The FSL flange can be used for both upright and upside-down installations. The FSL flange can also be used on gas springs with a lower U-groove by using the additional FSL adapter ring. The FSL adapter ring is ordered separately and is to replace the standard lock ring included in the FSL flange.

K
The k-lug is used to clamp the gas spring vertically upright to the tool. The gas spring can be clamped down using 2, 3 or 4 k-lugs. If only 2 lugs are used, then locking plate L must be also used to fix the gas spring. The K-lugs are only to be used to mount the spring vertically upright.

MP
MP is a square base mount to mount the gas spring to the tool by using the bottom threads of the gas spring into the tool. MP meets the ISO 11901-2, GM 90.25 and other standards.

RM
The RM mount is a removable square mount for mounting the gas spring in the base. The RM mount is an alternative to an SW (Square Welded) mount, making it possible to keep a more flexible inventory. The RM mount meets the Ford W-DX35-80 North America standard.

SM
SM is a body mount for the M2 gas spring.

SP
SP is a Side Port plate for the CU4 spring used for connecting into a hosed or linked system.

S
The S mount is a horizontal body mount allowing the gas spring to be installed in any orientation within the die.